UEM Jaipur Motosports Club
UEM MOTORSPORTS Club is a club under the University of Engineering and Management Jaipur and it is run by students of the Mechanical Engineering department. This club is involved in building innovative as well as economically feasible projects and inspires students to take part in research and development in the automobile and automation field its motto is “THINK DESIGN & PERFORM”. Club also gives training and development to students through workshops, and theoretical classes via audiovisual classes. It is both inspiring and sport; the inspire involves making design in designing software and create and prototyping, and the sport involves building assembling and ready for drive. To showcase their passion the club members, participate in various events in national and international level as well as colleges automobile league events.
They are the : –
- Champions of Rajasthan in National Kart Racing Championship, 2017
- 2ND position holder of Rajasthan in Mega ATV championship, 2017
- Finalists of International Baja SAE competition 2017
- Champions of SAE India Convention, North 2018.
Completed Projects
- ATV (All-Terrain Vehicle)
All-terrain vehicle means an engine-driven device with the following specifications: net weight of 2,000 pounds or less, width of 48 inches or less, equipped with a seat designed to be straddled by the operator designed to travel on three or more low-pressure tires. A low-pressure tire is a tire with a minimum width of six inches, designed to be mounted on a rim with a maximum diameter of 12 inches and inflated with an operating pressure not to exceed six pounds per square inch.
The term “All-terrain vehicle (ATV)” means engine driven device with the following specifications: a net weight of 2,000 pounds or less, which has a width of 65 inches or less, wheelbase of 94 inches or less, equipped with a seat designed side by side for a driver and a passenger, four or more low-pressure tires, engine size not to exceed 1,000 cc., equipped with a steering wheel stock. The BAJA SAE team used material AISI 1020(DOM) for manufacturing which contain carbon% 0.18-0.23% yield strength of 350MPa tensile strength 420MPa.
Though there were many hurdles difficulties still finally completed their ATV manufacturing through software analysis and ready for Mega ATV championship 2017 and acquired 2ND position.
2. GO-KART
A go-kart, also written as go-cart (often referred to as simply a kart), is a type of open-wheel car. Go-karts come in all shapes and forms, from motor less models to high-powered racing machines. Some, such as Super karts, are able to beat racing cars or motorcycles on long circuits.
The Students of the University of Engineering & Management (UEM), Jaipur designed and manufactured their own car – a Go Kart and participated in the National Kart Racing Championship and emerged champions of Rajasthan. The students of the University of Engineering & Management (UEM), Jaipur have developed this “Go Kart” at their own Mechanical Workshop. It was completed in a year. The pre final year students of 2015 batch gave their optimum inputs and achieved their goal. They grabbed the 1ST POSITION in Rajasthan at the National Kart Racing Championship preliminary round.
- STUDENT FORMULA RACING CAR
The team Elite Chariot students of UEM MOTO SPORTS had manufacture the student formula car in the workshop. The formula one car is a single-seat, open cockpit, open-wheel racing car with substantial front and rear wings, and an engine positioned behind the driver.
The project was started with the basic structure followed in any automobile industry with market survey, designing, manufacturing and giving it a proper finishing.
The Students of 2016 batch of the University of Engineering & Management (UEM), Jaipur designed and manufactured their own car and participate in SAE CONVENTION 2018 and won award for best suspension design.
- NUMITOR-18
- Numitor-18 is an “E-Series Bike”, which runs by paddling and motor as well. The motor used in this vehicle is of 250 W and operated on 24 V DC and the motor gets its power by ESC in controlled manner. Battery installed in this bike is a Li-ion battery (18cells assembled together) which gives output of 24V and 54000mAh capacity. Numitor-18 has range of 15-20Km with speed of 15Km/hr.
- Aerodynamic air vents are made to allow air circulation around the ESC, BMS and the battery to reduce rise in temperature while operating.
The dashboard comprises of an ignition key, Android phone-based speedometer, battery level indicator, headlight switch and also the horn switch. Charging port is mounted on the top of the body. The battery supports fast charging. It approx. requires 1hr. to charge 100%. Also, Smartphone charging port is available to charge the phone while riding.
It is done by the student of 2017 batch where the students’ of 2018 batch also involved learning and they learnt how to initiate and do a project along with seniors as well as with faculty.
UNDER DEVELOPMENT PROJECT
- AARON – “THE MONSTER BIKE”
The “AARON” is a muscle/monster bike designed and produced by the students of Mechanical engineering of UEM Jaipur, Rajasthan. It is basically a bike meant for heavy drag race with only linear degree of freedom. The 2017 batch students initiated this project and it is under development with the guidance and assistance of Professor Akash Dubey. The team members having their own roles and responsibilities in this project. The project started with the basic structure followed in any automobile industry starting with market survey, design, manufacturing and giving it a proper finishing.
Here the pic shown above is the current stage product.
Do you want to learn about automobile and automation? Does this project fascinate you?
Come be a part of team that is working on automobile, automation and its mechanism to drive and finish the line first! Join UEM MOTOSPORTS Club, UEM Jaipur!!
COME AND LEARN INITIATE YOUR DREAM AND EXPLORE YOUR IDEAS.
THINK DESIGN AND PERFORM…!!
For more details contact-
For more details contact-
Kumardeep Chakraborty,
Student, Department of Mechanical Engineering,
University of Engineering & Management (UEM), Jaipur
Bhaswat Jyoti Das,
Student, Department of Mechanical Engineering,
University of Engineering & Management (UEM), Jaipur